DIY SSD Guide

By Kevin O'Brien, NotebookReview Staff | | 105199 Reads

by Kevin O'Brien

Solid state disks (SSDs) are a flash-based memory storage device that carries an insane price premium in the current market. They will usually cost $600 to $1,000 as an upgrade from the manufacturer or computer parts store, making them outside the price range of many consumers. A new cheaper (slightly slower) option is available thanks to low-cost, high-capacity flash cards. This option is using a cheap compact flash to SATA adapter, and purchasing a moderately fast memory card that would fill your storage needs.

For this review I aimed to keep the price less than $100 just to show how affordable this option could be.

(view large image)

Specifications of the SATA adapter and Compact flash cards used for this review:

Addonics CF To SATA HDD Adapter

Enable Compact Flash (CFI/II) or Micro DriveTM to be used like ordinary 2.5" SATA hard drive
Mounts directly onto notebook 2.5" SATA connector
CF Card can be the primary bootable device containing the OS and applications.
Transparent to the operating system and does not require any drivers
Supports DMA and Ultra DMA modes (only on flash media card with such features).
Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux
Price $30 (available here)

Trancend 4GB 266x Compact Flash

Capacity 4GB
Speed 266X (40MB/sec Max)
Support IDE PIO mode 6, Ultra DMA mode 4
Compliant with the CF4.0 specification
Built-in hardware ECC technology
Built-in ATA interface for easy Plug and Play interoperability
Lower power consumption
Price $60

Kingston 4GB 133x Compact Flash

Speed - 25MB/sec. read, 20MB/sec. write
Standardized - complies with CompactFlash Association specification standards
Economical - autosleep mode preserves system battery life
Price $40 (Free after rebate)

Sandisk Ultra II 512MB Compact Flash

Minimum of 10MB/second sequential read speed for ultra-fast image viewing and data transfer
Minimum 9MB/second sequential write speed lets you capture large image files faster
Low power consumption for longer battery life
Price Free, old flash laying around

Setup

One nice perk of these types of devices is they don't require any drivers to work on any system. There are a few requirements though; the system must have SATA, and the compact flash card must support DMA modes. Some older flash cards will have problems, but since 4GB to 16GB flash cards didn't economically exist a few years ago, this should not be a problem.

(view large image)	(view large image)
(view large image)	(view large image)

Installing the operating system was the only other setup required for this review, and it follows the same installation process as any other Windows XP install process. If you are wondering why I didn't pick Vista, our review budget limited us to 4GB cards that were fast enough to compete against a standard hard drive. If you move your budget up $50 or $100 more, you will open yourself up to 8GB and larger cards that would be fine for installing Vista.

Performance

Now you are probably wondering what the performance difference is between a standard 7200rpm drive, true SSD, and my DIY SSD. For this review I cover those three drives, as well as a handful of others to give you the best idea of what to expect.

The first lineup of benchmarks comparison use the software PerformanceTest, and the included disk test. As you can see, the DIY SSD performs quite well, even outperforming a true SSD found in the Sony VAIO TZ.

Disk Speed	Apple MacBook Air 4200 rpm 1.8" HD	1.8" SSD in Sony TZ	DIY SSD	7200 rpm 2.5" HD	Memoright 128GB SATA SSD
Sequential Read	16.3	27.7	30.1	40.9	37.7
Sequential Write	22.7	13.4	21.0	38.0	60.3
Random Seek + RW	1.28	1.21	1.44	2.97	3.55
Disk Mark	145.7	153.0	189.9	295.9	367.2
PassMark Rating	29.1	30.6	38.9	59.2	73.4

For HDTune, we included more drives into the comparison, including multiple types of compact flash card to show you how much speed can vary between cards. (Note: Not all compact flash cards are made equal, and the old 512MB Sandisk card has very poor access times.)

MacBook Air:

(view large image)

Sony TZ SSD:

(view large image)

5400 rpm HD:

(view large image)

Kingston CF:

(view large image)

Trancend CF:

(view large image)

Sandisk CF:

(view large image)

7200 rpm HD:

(view large image)

32GB Memoright SSD:

(view large image)

128GB Memoright SSD:

(view large image)

PCMark05 benchmarks:
(Higher scores mean better performance)

Lenovo T60 2.16GHz w/ 7200rpm XP: 4816
Lenovo T60 2.16GHz w/ DIY SSD XP: 3930

I figure the main difference between these two scores is the 7200rpm drive has a much faster disk transfer rate. Still, if you violently shake a notebook with a standard hard drive while it's accessing the drive you will kill the drive. You can violently shake a DIY SSD and nothing will happen.

Power Consumption

With the DIY SSD, I was expecting at least a little less power draw, but nothing was found in my use. Idle power draw was around 15.3w for both the 7200rpm drive, and the DIY SSD. Chances are the $30 adapter has nowhere near the power efficiency levels that a true SSD would have.

Conclusion

With this review I was planning on showing a proof of concept that it was possible to make your own SSD and didn't expect that it would provide such great real world results. While many very pricey performance SSDs exist, the module I assembled had greater speeds than the SSD found in an off the shelf notebook at a fraction of the price. If you are on a budget and need an option for a notebook that sees very rough duty, or you just like snappy boot times you may want to check this out.

Pros